LONG BOOM SEAM TRACKING SYSTEM FOR SUBMERGED-ARC WELDING BD-4 TYPE



FEATURE OF LONG BOOM SEAM TRACKING SYSTEM FOR SUBMERGED-ARC WELDING BD-4 TYPE
Submerged-arc Welding obtainable on market is so much difficult to be automated, because operator has always watch torch position to be coincidental to welding line which is corrected form disalignment of traveling on rail, and welding line is covered by flux. Thus, operator is compelled to do only by intuition, and is not taking his eyes off.

With having Seam Tracking System BD4 assembled, it will automatically trace welding line. After starting operation, perfect automatic welding can be achieved.

This machine's moving axis is used with long boom and will trace variation of welding line up to 400mm vertically and horizontally.

Probe with lifting up mechanism and Contact Tip KCS-W5 will trace the same position of both sides concentrating around the welding torch. This is suitable for fillet welding of H-Bean diaphragm and curved beam.

This machine was assembled in keeping good balance. However, when moving, something be required not for falling down or balance weight to be equipped.

Good look of welding bead finished and of perfect root running of back welding is obtainable, so it's useful for improvement of good quality.

It will make easy for positional of rail and work and working time will be considerably shortened.


OUTLOOK

Table 1 Set Model ¥ Composition ¥ Specification ¥ Application

Nomenclature Model Specification
Prove KC11-03 Accuracy}0.3mm
Adjusting Holder with Lifting Up KCH-7HR Adjusting Range each 20mm vrrtically and horizontally
Probe Tip KCS-H14-W5-60 Probe Tip Width 60mm
Horizontal Boom MF-105 Rack Moving Type, stroke 400mm
Vertical Boom MF-105 Rack Moving Type, stroke 400mm
Control Unit CC-107 Input AC100V
Assembling Parts @ ref. Assembling Dwgs

[NOTE] Standard Specification This will be changed without notice.

Photo : Torch Portion Example of Special Work applied

[NEXT/BACK/contents/home page]