@
FEATURES OF "KILONY" GUIDE NC-TYPE
"KILONY" GUIDE NC-TYPE is practical to 'Automatic Seam Tracking on Welded Line' adopting the probe sensor tip contacted the work.
This is proud of having plenty of actual record and also of having practical use available for all sorts of welding spot.
Smoothly and lightly operating will assure high accuracy seam tracking realizable.
Changing 3-modes 'right act', both 'sides act' or 'left act' and setting 'Forward Setting L1', or 'Parallel Setting L2' will male any kind and shape or work applicable.
Probe Tip is replaceable, so it's applicable to any shape of beveling.
Probe Sensor, which is the heart of "KILONY" GUIDE NC-TYPE, is precise sensor outputting the contact signal of positioning relation between beveling and torch in high accuracy.
Further, prove sensor adapting to environment is designed to take welding work environment in deep consideration and highly reputed.
Each unit of Probe Sensor, Control and Slide is compact and light weighty, and easy to be fitted to conventional automatic welding system even later on.
"KILONY" GUIDE NC-TYPE is the standard model of automatic seam tracking system on welding line.
@
"OTC" Automelt SW-24 (Model:BD 1) | "OTC" Automelt SWT-24 (Model:BD 2) |
FEATURES EXPLANATION
Prove Sensor, which is the heart of "KILONY" Guide NC Type, should be correctly fitted just in accordance with work shape and also beveling size to be applied. The both sides act mode is to search beveling bottom, and is to move the reverse side if pushed by force at right or left direction, and always to keep the neutral position. This is used mainly for horizontal downward welding.
The right (left) act mode is to search beveling bottom and also right side (left side) and to keep the distance constant between the bottom and the side. The probe sensor correctly fitted is to make the output of contact signal sensing the positioning relation of welding torch aiming position and also of beveling position. This signal is analyzed into 2 way directions; upward/downward, and rightward/leftward. The signal accuracy is ranked at 3 kinds (}0.3mm/}0.5mm/}0.1mm) according to the probe model. The most suitable model should be selected for application.
Control Unit is to receive the contact signal transmitted from the probe sensor and to automatically recognize the present state of each position. The control Unit is to recognize displacement between the torch aiming position and the beveling position, and simultaneously drive the slide units within the range of probe accuracy.
Operation of this positioning correctness will be repeated rapidly and continuously.
Thus, "KILONY" Guide NC Type can pursue welding line at high accuracy.
Set Model | NC3 | NC5 | NC10 | NC20 | @ |
Probe Set @Seam Tracking @Accuracy |
KC11-03THR (THL) }0.3mm KC11-05 available KC11-01 available |
KC11-03THR (THL) }0.3mm KC11-05 available KC11-01 available |
KC11-05THR (THL) }0.5mm KC11-03 available |
KC11-05THR (THL) }0.5mm KC11-03 available |
THR=handle on the right direction THL=handle on the left direction |
Control Unit @Function @Manual Operation |
CC107A Seam Tracking Lifting Function ª«©¨ Motion |
CC107A Seam Tracking Lifting Function ª«©¨ Motion |
CC107A Seam Tracking Lifting Function ª«©¨ Motion |
CC107A Seam Tracking Lifting Function ª«©¨ Motion |
AC100V |
Cable for Power for Sensor for SlideUnit |
Standard Set CCCP-20 KCC1-15 CCCS105-15 |
Standard Set CCCP-20 KCC1-15 CCCS105-15 |
Standard Set CCCP-20 KCC1-15 CCCS105-15 |
Standard Set CCCP-20 KCC1-15 CCCS105-15 |
Length 2.0m 1.5m 1.5m |
Slide Unit @Loadable @Moment Load @Storoke, max. @Warkibg Speed, max. @Motor Voltage |
SK31-100LD 10Kg 200Kg¥cm 100mm 200mm/min. DC100V |
SK5-150LD 25Kg 500Kg¥cm 150mm 200mm/min. DC100V |
SK10-150LD 50Kg 1000Kg¥cm 150mm 200mm/min. DC100V |
SG20-100LD 100Kg 2000Kg¥cm 100mm 160mm/min. DC100V |
@ |
Application | for TIG CO2 |
for CO2 MIG/MAG |
for Single Submerge |
for Tandem Submerge |
@ |
[NOTE] Specification to
be subject to change without prior notice.
Product Name | Model | Specification Outline |
Probe Water Cooled Cover | KCH-X2 | to be used Probe Heat over 70Ž |
Remote Control Box Set @Remote Control Box @Remote Control Cable |
CCR1-30 CCR1 CCCR-30 |
CCR1+CCCR-30 in set Seam Tracking ON/OFF, Up/Down, Right/Left inching 120~80~50mm 0.5kg 3m length, metal connector joint |